These checks apply to the Brightcall desktop app for Mac and Windows.
Cannot sign in
Use your agent’s Dialer Key. See Installing Dialer on Mac & Windows for the sign-in instructions.
If you see Incorrect dialer key, first check for accidental spaces at the beginning or end of the key. Re-enter the key without these spaces and click Sign in. If you still cannot sign in, ask your administrator to check your agent’s current Dialer Key and calling-device configuration.
The app shows “Something went wrong”
When you are not in a call, click Restart application on the error screen.
Wait for the app to reconnect.
If the error returns, try another network, such as a mobile hotspot, and restart the app again. Note whether changing networks makes a difference.
If the app specifically reports a microphone problem, follow The other person cannot hear you below.
An outgoing call does not start
If you click Call, but no call starts—even if the number disappears from the field:
Open Menu → Restart Application.
Wait for the app to reconnect, then enter the number and try again.
If a message asks you to check your internet connection, try another network and restart the app again.
If the app flags the number as invalid, check the number and country code before retrying.
Calls do not reach the desktop app
When you are available to receive calls, make sure the lightning switch in the top-left corner is set to Online.
Click the device icon next to it to open Select Device.
If Mobile phone (…) is selected, calls are routed to that phone rather than the desktop app. Switch back to the device your team uses for calls in the app. If you are unsure which one to select, ask your administrator.
If incoming calls still do not reach you, ask your administrator to check that your agent is included in the incoming call routing.
An incoming call appears, but there is no ringtone
Open Menu → Call Settings.
If Enable Silent Mode is on, switch it off.
This screenshot shows Silent Mode enabled. Turn it off to hear incoming-call sounds.
If the ringtone is still inaudible, follow the speaker checks below.
You cannot hear the other person
Check that your headset or speakers are connected and their volume is turned up.
Open Menu → Audio Settings.
Under Speaker, select the headset or speakers you want to use.
Click Test speaker and listen for the test sound.
If you connected a headset while Audio Settings was open, close and reopen the settings to refresh the device list.
The other person cannot hear you
Open Menu → Audio Settings.
Under Microphone, select the microphone you want to use.
Click Test microphone, speak and check that the level meter moves.
Click Stop microphone test when finished.
If microphone access is blocked, allow Brightcall Dialer to use the microphone in your operating system’s privacy settings. Restart the app and retry the test.
If the microphone cannot be started, reconnect it, close other apps using it or select another available microphone, then retry.
Check audio in a call
Call 5555 from the app and follow the voice instructions. Speak after the signal. You should hear the prompts and then a recording of your voice.
If the local audio tests work but sound in the 5555 call is missing or breaks up, try a wired connection or another network and repeat the test.
If 5555 sounds clear but another call has an audio problem, report the affected call using the instructions below.
Still having trouble?
Open More Options → Report an issue.
Enter your Email for a response and describe the problem. The Number field is optional.
Include:
The exact error message, if shown, and your app version.
The time of the call or failed attempt, including your time zone.
The Call ID, if available; see where to find it.
For audio problems, what you heard during the 5555 test.
For connection problems, whether trying another network helped.
Click Send. You can check replies under More Options → My reports.
If you cannot sign in or send a report from the app, email [email protected]. Include the details above, your Brightcall account email and your agent name or number. When emailing Support, attach a screenshot of the error if available.






